Purchase this Product and Earn 21 Reward Points (£0.42)

Evercoat Easy Sand 880ml

  Earn 21 Reward Points
£21.00 Price: (inc VAT)

Two-part flowable polyester finishing and blending putty. Contains Hattonite™ for optimum sanding performance. Ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections. Includes ZNX-7® for adhesion to galvanized metal, aluminum and steel. Part of the MetalWorks® System. Blue cream hardener included.

SKU: EVE101669 Category:
Quantity

Description

Evercoat Easy Sand best practice when using Evercoat Rage Gold:

  1. CLEAN – Clean and degrease the body panel to be repaired.
  2. STRAIGHTEN PANEL – Straighten the panel to be repaired as needed.
  3. PAINT REMOVAL – Remove paint with 80 grit in the area to be filled
  4. PREPARATION – Sand and feather-edge the area with 80 grit to remove only the clear coat and base coat, then remove sanding dust with clean compressed air.
  5. APPLY FILLER – Apply Evercoat filler with even, firm pressure in a thin coat, then apply additional material as needed.
  6. SAND AND FEATHER-EDGE – Sand the filler to shape with 80 grit, then final sand and feather-edge with 180 grit. Remove sanding dust with clean compressed air.
  7. APPLY PUTTY – Apply a thin coat of easy sand over the entire repair with even, firm pressure to provide a primer-like finish. Note: Putty is optional when using Rage Gold.
  8. SAND – Sand and feather-edge the putty with 180 grit.
  9. REMOVE SANDING DUST AND INSPECT – Remove the sanding dust with clean compressed air and inspect area for coarse sand scratches, pinholes, or imperfections.
Technical Data

Technical Data

Technical Data

You may also like…