This clear is best used on the below substrates:
- Cold rolled steel
- Stainless Steel
- Zinc plated steel
- Specifically good on ABS and PVC
- Not recommended on PP/Talc, PE or PP/EPDM
It is always best to try out a sample and test for adhesion yourself. This can be done by applying the clear and baking leaving it a day to cool and finish curing and using a blade to cross hatch the clear and apply tape and remove.
As with all DTM clears, this does not provide any anti- corrosive properties. This works by creating a barrier effect over the substrate to stop the metal from oxidizing.